Request a Quote

Please fill out the following form below.

TESCOM 44-1126-24 Pressure Reducing Regulator Stainless Steel 50-6,000 PSIG

SKU: 44-1126-24 Rate this product


Availability: 1 In Stock. Usually ships in 7 weeks if not in stock.

Click to Enlarge Image



  • Ground Support Equipment (GSE)
  • Support pressure panels
  • Aircraft charging carts
  • R & D laboratories
  • Calibration equipment


  • Removable valve assembly module permits easy repair
  • Excellent sensitivity through a wide range of pressure settings
  • Piston style sensor offers extra safety and reliability
  • Unbalanced stem assists positive shut-off
  • Inlet and outlet gauge ports standard
  • Venting is standard
  • Regulator vents to zero PSIG in all pressure ranges


  • Maximum Rated Inlet Pressure: 10,000 PSIG / 690 bar
  • Outlet Pressure Range: 50-6,000 PSIG / 3.4-414 bar
  • Design Proof Pressure: 150% of maximum rated inlet
  • Leakage: Bubble-tight
  • Operating Temperature: -40 degrees F to +165 degrees F (-40 degrees C to +75 degrees C)
  • Flow Capacity: Cv = .06
  • Maximum Operating Torque: 35 in.-lb. (3.95 Nm)
  • Body Material: Stainless Steel
  • Inlet and Outlet Ports: 1/4 in. NPTF

Media Contact Materials:

  • Body: Stainless Steel
  • Filter Stainless Steel Body: 15 Micron (nominal) - 316 Stainless Steel
  • Main Valve Seat: Vespel®
  • Vent Valve Seat: CTFE
  • O-Rings: Buna-N
  • Back-up Rings: Teflon®
  • Remaining Parts: 300 Series Stainless Steel


  • Cleaning: CGA 4.1 and ASTM G93
  • Weight: 4.8 lbs / 2.2 kg

The TESCOM 44-1100 Series high pressure, low flow venting regulator offers a piston sensed design, control pressures of 6000-10,000 psig / 414-690 bar, a low torque setting and large handknob. Multiple pressure range kits are available. Ideal for use in Ground Support Equipment (GSE), support pressure panels, aircraft charging carts, R & D laboratories and calibration equipment.​


Product FAQ's

Ask a Question

  • What type of lubricant should I use when overhauling my Tescom regulator?
    The only approved lubricant is Christo-Lube MCG-111.
    How helpful was this information?


Customers Who Bought This Item Also Bought