Request a Quote

Please fill out the following form below.

SEA CON MCIL6M Micro Wet-Con In-Line Connector - 6 Pin Male

SKU: MCIL6M Rate this product

$47.07

Availability: 8 In Stock. Usually ships in 8 weeks if not in stock.

Restrictions / Notifications

  • This item does not qualify for free shipping.

Click to Enlarge Image

Overview

Applications:

  • Underwater camera and lights (video system)
  • Diver communications
  • ROV systems
  • Submersibles
  • Towed-array cable systems
  • Current meters
  • Animal migration research
  • Food processing equipment

Specifications:

  • Molded Body: Neoprene
  • Bulkhead Body: Brass
  • Contacts: Brass-Gold Plated
  • Guide Pins: Stainless Steel
  • In-Line Cable: 6 Pin: Neoprene #20 AWG
  • In-Line Cable Length: 24 Inches (60cm)
  • Open Face Pressure: 10,000 PSI (700 Bar) Optional And Needs To Be Specified Dummy Cap Recommended Above 100 PSI
  • Mated Pressure: 10,000 PSI (700 Bar)
  • Voltage Rating 6 Pin: 300 VDC
  • Current Rating: 3 Amps Per Contact
  • Insulation Resistance: >200 Megohms @ 300 VDC
  • Contact Resistance: <0.01 Ohms
  • Air Mate: >1,000 Cycles
  • Underwater Mate: >500
  • Operating Temperature: 25° To 140°F (-4° To 60°C)
  • Mates with: MCIL6F and MCBH6F
  • Dummy Connector Mate: MCDC6F
  • Connector Pin: 6
  • Length 0.75 in.
  • Width: 0.62 in.
Description

SEA CON Micro Wet-Con Series MCIL6M Male 6 Pin In-Line Connector allows for smaller through ports in a pressure vessel and a greater density of conductors in a compact area.This connector is wet-mateable therefore enabling connections to be made underwater, on-deck or in any weather condition.

Videos

Additional Information

Search Weight No
Brand SEA CON
Managed FEATURED PRODUCT
GSA No
DOD No
Clearance Item No
Video No
FAQ
 

Product FAQ's

Ask a Question

  • Is it possible to re-connect underwater at a depth of 100 meters?
    Technically you can mate this connector at full depth rating. However, divers can only dive a certain depth, unless you have an ROV to mate it much deeper. The difficult part is to de-mate the connector underwater for the fact that the pressure keeps the connector mated and virtually impossible for a diver to de-mate. When connected and you try to pull apart underwater, this creates a vacuum which holds the connector mated unless you have enough torque to pull apart. The connector can re-connect at 100M.
    How helpful was this information?

ATTACHMENTS

Customers Who Bought This Item Also Bought