Request a Quote

Please fill out the following form below.

Dwyer VFA-22-BV - Visi-Float Flowmeter - 2 in. Scale - LPM Air - 0.15-1 Range - Brass Metering Valve and Connections

SKU: VFA-22-BV Rate this product


Availability: 27 In Stock. Usually ships in 1 weeks if not in stock.

Restrictions / Notifications

Click to Enlarge Image



  • Exceptionally tough
  • Brass valve and connections


  • Scale Length: 2 inch
  • Scale Type: LPM Air
  • Range: 0.15-1
  • Options: Brass Metering Valve & Connections

Pipe Connections

  • VFA and VFB: 1/8 in. NPT (1/4 in. NPT on VFB 85 and 86)
  • O-rings: Buna-N
  • Pressure Rating: 100 PSI Max.

Temperature Rating

  • VFA and VFB: 150° Max.


  • Model VFA: 5% of full scale

Model VFA Dimensions

  • Dimensions: 4-3/16 in. H x 1 in. W x 1-1/4 in. D
  • BV or SSV (open): 2-1/16 in.

Many more options are available for the Visi-Float Flowmeter. Please call Amron's award winning sales staff at (760) 208-6500 for a quote today!


Dwyer Visi-Float® Series Flowmeters are available from Amron in a broad selection of flow ranges and direct reading scales for air, gas or water.

Visi-Float® Acrylic Flow meters are exceptionally tough. They are designed for use at pressures up to 100 PSI and temperatures up to 150°F. Do not exceed these limits! Flowmeters should not be exposed to strong chlorine atmospheres or solvents that may be destructive to the acrylic body.

Dwyer flowmeters must be mounted in a vertical position with the inlet connection at the bottom and outlet at the top. They can be mounted to a panel, in front of a panel supported by piping only, or mounted directly in rigid piping.


Product FAQ's

Ask a Question

  • What is the maximum supply pressure I can use with the Visi-Float Flowmeter?

    100 PSI.

    How helpful was this information?

  • Can I mount my Visi-Float Flowmeter in any other position than vertical?

    No, the flowmeter must be mounted in the vertical position. 

    How helpful was this information?