Request a Quote

Please fill out the following form below.

Analox AX1BK20X57Q2Y56 Safe-Ox+ Wall Mount Oxygen (O2) Depletion and Enrichment Monitor 110V AC US Plug with Quick Connect Repeater and Two Relays

SKU: AX1BK20X57Q2Y56 Rate this product

$1,329.47

Availability: Usually ships 5 weeks after receipt of order

Restrictions / Notifications

  • This item cannot be cancelled or returned once an order has been placed.

Click to Enlarge Image

Overview

Features:

  • Simple Calibration: Safe-Ox+ can be calibrated on "pure air" which is easy to source and ship globally and affordable too
  • Calibration required every 18 months
  • Long life O2 sensor: Can last up to 10 years*
  • Minimal maintenance: Unlike other oxygen monitors the Safe-Ox+ only needs calibrating every 18 months and the sensor does not need changing every 2 years
  • "Plug and play": Safe-Ox+ is easily wall-mounted and basic installation does not require a qualified electrician
  • Repeater Included: Safe-Ox+ comes complete with a repeater which is to be placed at the entrance to provide an early warning before entering the room
  • Suitable for use with helium: Presence of helium can affect the readings of most O2 monitors but the Safe-Ox+ will provide accurate, reliable readings if helium is one of the gases you are concerned about
  • No risk of accidental calibration: Safe-Ox+ does not allow the user to calibrate it using ambient air. A certified calibration gas must be passed over the sensor at 18 month periods. This is a safety feature which prevents a potentially false calibration being made.

* Oxygen sensor lives are affected by variables such as the amount of oxygen they are exposed to and the environmental temperature and humidity.

Sensor Specifications:

  • Gas Detected: High and Low Oxygen Levels
  • Mode of Operation: Electrochemical
  • Range: 0.1 to 25%
  • Alarm Set Points: 19.5 and 23%
  • Accuracy:
    • Better than ± 0.75% O2 over 5.0 to 25.0% O2
    • Better than ± 1.00% O2 over 0.1 to 5.0% O2
  • Response Time: O2 - 60 seconds
  • Warm Up Time: 10 seconds
  • Resolution: 0.1% O2
  • Warranty: 1 year

Analyzer Specifications:

  • Analyzer type: Fixed
  • Power: 9-24V DC
  • Power Consumption: <5 VA
  • Quick Connect Repeater
  • Fitted Display: 4 Digit LCD
  • CSA English Language
  • Operating Temperature: 32 to 104°F (0 to 40°C)
  • (2) Relay Outputs - One on Each Alarm
  • Dimensions:
    • Analyzer: 6.9 x 4.33 x 2.95 in. (175 x 110 x 75 mm)
    • Repeater: 2.83 x 6.69 x 1.77 in. (72 x 170 x 45 mm)
  • IP rating: IP65 (apart from quick connect repeater which is IP43)
  • Warranty: 2 years electrical
  • Analyzer Approvals:
    • EMC Directive 89/336/EEC (EN50270:1999, EN61000-6-3:2001+A11:2004
    • Low Voltage Directive 73/23/EEC (BS EN 61010-1:2001, IEC 61010-1(2ed))
    • AS61010.1-2003 (Australia & New Zealand)
Description

The Analox Safe-Ox+ is an oxygen enrichment & depletion monitor ideal for use where there is either a threat of a potential leak or build-up of enriched oxygen which could pose a fire risk or there is a potential risk of a leak or build-up of an inert gas such as nitrogen, argon or helium. The Safe-Ox+ provides two audio visual alarms which are pre-set at 19.5% & 23% (but can be adjusted).

Enriched oxygen (also known as nitrox, EANx, Safe Air and enriched air nitrox) is used in a variety of industries and the main concern is that if there is a build up of the gas then it can pose a fire/explosion risk should there also be an ignition source. As part of a risk assessment (or in the case of industries such as commercial diving - guidelines) employers have a duty of care to their employees and the public and the installation of the Safe-Ox+ is an ideal safety solution.

Industries using enriched oxygen include: scuba diving, commercial diving, hyperbaric oxygen therapy (HBOT), gas production and gas blending stations, medical gases such as nitrous oxide/oxygen mixes, sulphuric and nitric acid manufacturing, mining, steel manufacturing and metal refining, aquaculture, and glass manufacturing.

The Safe-Ox+ main sensor unit is wall mounted at normal working head height in the area/s recommended as a result of a risk assessment (often where the gases are stored and/or piped). The repeater unit/s (which take their power from the main unit) are then sited at the entrance/s to the area to provide an early warning before entering.

Videos

Additional Information

Search Weight 50
Brand Analox
Managed FEATURED PRODUCT
GSA No
DOD No
Clearance Item No
Video No
FAQ
 

Product FAQ's

Ask a Question

No questions have been asked for this product. To ask a question please click the Ask a Question button and fill out the form. Thank you.

ATTACHMENTS

Customers Who Bought This Item Also Bought