Request a Quote

Please fill out the following form below.

Stanley Tools Hydraulic Underwater Chipping Hammer CH18

SKU: CH18311 Rate this product

List Price: $2,954.00

$2,600.11

Availability: 3 available on Oct 17, 2014

Restrictions / Notifications

  • This item does not qualify for free shipping.

Click to Enlarge Image

Overview

Features

  • "D" Handle is a light but powerful alternative to pneumatic tools
  • Accepts standard 0.58 inches round collar steels
  • Tool steels are held in place by a slide that is detented for balls and springs
  • Flush-face quick disconnect couplers are sold separately. For couplers, please purchase 1 set of Part Number 03971 Quick Disconnect Couplers

Stanley Hydraulic Underwater Chipping Hammer CH18311 Includes

Specifications

  • Application: Chipping light concrete, rock, masonry or coral underwater 
  • Output Capacity: 0.58 in. Hex x 2-1/2 in. Shank Steel Bits
  • Hydraulic Flow: 7-9 gpm (26-34 lpm) at the commercial diver
  • Weight: 24 lbs.
  • Length: 20 in. (51 cm)
  • Width: 3 in. (8 cm)
  • Connection: 3/8 in. NPT 
Description

Stanley’s Hydraulic Underwater Chipping Hammer CH18, with “D” handle, is a light but powerful alternative for commercial divers to pneumatic tools. Both the handle and the tool holder ends are shock and heat insulated for commercial diver comfort.

The Stanley Hydraulic Underwater Chipping Hammer CH18 comes furnished with hose whips. Stanley Tools 03971 Coupler Set for the Hydraulic Underwater Tools are sold separately.

Designed to be small and compact for confined underwater working conditions and medium duty chipping, the Stanley Hydraulic Underwater Chipping Hammer CH18 accepts standard 0.58 inch round collar steels, and chipper tool bits. The Stanley Hydraulic Underwater Chipping Hammer CH18 is designed to run off a HTMA type II hydraulic circuit.

Designed for heavy duty underwater operations, it can be used by commercial divers in any position.

  • “D” handle and tool bit holder are shock and heat insulated
  • Tool steels are held in place by a slide that is detented for balls and springs
  • Uses standard 0.58 inch hex, round collar, steel tool bits 

*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool. Available files for download are listed below:

  • CH18 Accessories
  • CH18 Users Manual
  • CH18 Blowapart and Key

*Please see ACCESSORIES tab for service tools, toolbits, and accessories for the Stanley Hydraulic Underwater Chipping Hammer CH18.

Attachments
Videos

Additional Information

Brand Stanley Tools
Video No
FAQ
 

Product FAQ's

Ask a Question

  • What is the large threaded hole on the opposite side of the hose whips and trigger mechanism for on the CH18 Chipping Hammer?
    It’s for an assist handle but the assist handle is no longer available.
    How helpful was this information?

  • Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?
    Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
    How helpful was this information?

  • Do any of the Stanley hydraulic tools ship full of hydraulic oil?
    No, but the factory normally will leave a little fluid inside the tool to help lubricate the internal components during storage.
    How helpful was this information?

Customers Who Bought This Item Also Bought


Customers Who Viewed This Item Also Viewed