- Floating trigger design required minimal pressure across any part of its surface to engage the underwater tool
- Accepts 0.58 hex-shank-oval collar tool bits
- CE version
Stanley Hydraulic Underwater Chipping Hammer CH15 Part Number CH1533101 Includes
- 12in. Pigtail Hose whips (All tools require 2): Part Number 01652
- Quick Disconnect Face Coupler Set 3/8in NPT: Part Number 03971
- User Manual
- Capacity: Versa-chuck allows use of .58 hex shank steel bits
- Input Oil Flow: 7 - 9 gpm
- Input Pressure: 1000-2000 psi
- Ports: 8 SAE O-Ring
- Weight: 16 lbs.
- Length: 17 in.
- Connection: 1/2 in. Flush-Face, Quick Disconnect Couplers
The Stanley Hydraulic Underwater Chipping Hammer CH15 is a light but powerful alternative to air powered tools. Designed for medium to heavy-duty jobs, the Stanley Underwater CH15’s high power-to-weight ratio makes it the ideal underwater tool for commercial divers working on light concrete breaking jobs and for chipping concrete or steel underwater. The compact size and balance of the underwater tool makes it easy for commercial divers to use in confined, hard-to-reach locations. This Stanley Hydraulic Underwater Chipping Hammer model is the CE version.
The Stanley Hydraulic Underwater Chipping Hammer CH15 comes furnished with hose whips and quick disconnect couplers.
The body of the Stanley Hydraulic Underwater Chipping Hammer CH15 is shock and heat insulated. The ergonomic design of the handle and grip provide increased control and diver comfort, resulting in increased commercial diver productivity.
The Stanley Hydraulic Underwater Chipping Hammer CH15 has a floating trigger design requires minimal pressure across any part of its surface to engage the underwater tool. The trigger is protected within the handle to prevent accidental operation of the underwater tool.
The Stanley Hydraulic Underwater Chipping Hammer CH15 has a solid bit retainer and will accept 0.58 inch hex shank - oval collar tool bits.
The Stanley Hydraulic Underwater Chipping Hammer CH15 can be powered by the Stanley Hydraulic Portable Power Unit GT18 or any hydraulic power supply capable of delivering 7-9 gpm (15-23 or 26-34 lpm) at 1000- 2000 psi (69-140 bar) down to the commercial diver.
The hydraulic power supply should meet the requirements of the HTMA Type I or Type II tool circuits.
*Please see ACCESSORIES tab for service tools, toolbits, and accessories for the Stanley Hydraulic Underwater Chipping Hammer CH15.
*Please reference the ATTACHMENTS tab for downloadable and printable files on this underwater tool. Available files for download are listed below:
- CH15 Accessories
- CH15 Users Manual
- CH15 Blowapart and Key
Brand Stanley Tools Video No
Will my tool operate if I use a lower flow rate than what would be considered optimum for the tool to operate?Yes, most tools have an optimal flow range, as long as the gallons per minute delivered to the tool is within this range the tool will work. However, please be award that the tool will run at a slower speed based on the flow rated delivered to the tool. Basically, the lower the gallons per minute the slower the tool will run.
You may also be interested in the following product(s)
List Price: $77.58$68.70