Note to Commercial Divers:
The RMG-4-FS and RMG-4-MP are the 18 Gauge, 4 Contact Connector with the (SJ / SJOOW AIW-K) Cable Jacket for use with the KMDSI Helmets.
Ordering Information (Please contact your Amron Representative for connectors with 1, 5 or 6 contacts)In-Line ConnectorCableLocking SleevesDummy PlugsFemale SocketMale Pin18 in. CableAmpsFemale*Male*Female High Pressure (For use up to 20,000 PSI (44,000 ft./13,000 m)Male Low Pressure (For use up to 4,000 PSI) (9,000 ft./2,700 m)Male High Pressure (For use 4,000 PSI to 20,000 PSI (44,000 ft./13,000 m)RMG-2-FSRMG-2-MP18/2 (AWG SO)7G-FLS-D/SG-MLS-D/SRMG-2-FSD-HPRMG-MPD-LPRMG-2-MPD-HPRMG-3-FSRMG-3-MP18/3 (AWG SO)7G-FLS-D/SG-MLS-D/SRMG-3-FSD-HPRMG-MPD-LPRMG-3-MPD-HPRMG-4-FSRMG-4-MP18/4(AIW SJO)**5.6G-FLS-D/SG-MLS-D/SRMG-4-FSD-HPRMG-MPD-LPRMG-4-MPD-HP
- Material: Special Neoprene, Molded
- Contacts: Copper Alloy-Gold Plated per ASTM-B-488
- Voltage Rating: 300 VDC
- Pressure Rating: Up to 20,000 PSI
* D=Delrin, S=Stainless Steel
** For Kirby Morgan Helmets
SEA CON® RMG-4-MP - RMG Series In-Line Rubber Molded Connector - 4 Male Pins with 18 in. Pigtail of 18 Gauge (SO/SJOOW AIW-K) Cable for KMDSI Helmets are the industry standard for Kirby Morgan® Helmets, Masks and diver umbilicals.
Other typical uses are for underwater cameras, lighting systems, instrumentation. The Marsh and Marine® connectors are universally mateable to most major brands in this category.
Brand SEA CON Video No
Why is the SJO cable on the RMG-4-MP only rated to 300 volts when the other RMG connectors are rated to 600 volts?Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator.
Customers Who Bought This Item Also Bought
List Price: $57.08$48.52