Request a Quote

Please fill out the following form below.

SEA CON RMG-4-FS - RMG Series In-Line Rubber Molded Connector - 4 Female Sockets

Be the first to review this product

SKU: RMG-4-FS

List Price: $31.51

$29.78

Availability: 511 In Stock

  • SEA CON 4RMG-4-FS - RMG Series In-Line Rubber Molded Connector - 4 Female Sockets with 18 in. Pigtail of 18 Gauge (SO/SJOOW AIW-K) Cable for KMDSI Helmets
  • SEA CON RMG Series In-Line Rubber Molded Connector Diagram

SEA CON 4RMG-4-FS - RMG Series In-Line Rubber Molded Connector - 4 Female Sockets with 18 in. Pigtail of 18 Gauge (SO/SJOOW AIW-K) Cable for KMDSI Helmets

Double click on above image to view full picture

Zoom Out
Zoom In
Overview

Note to Commercial Divers

The RMG-4-FS and RMG-4-MP are the 18 Gauge, 4 Contact Connector with the (SJ / SJOOW AIW-K) Cable Jacket for use with the KMDSI Helmets.

Specifications

  • Material: Special Neoprene, Molded
  • Contacts: Brass, Hard Gold Plated per ASTM-B-488
  • Voltage Rating: 600 VDC
  • Pressure Rating: up to 20,000 PSI

 

Ordering Information (Please contact your Amron Representative for connectors with 1, 5 or 6 contacts)
In-Line Connector
Cable
Locking Sleeves
Dummy Plugs
Female Socket
Male Pin
18 in. Cable
Amps
Female*
Male*
Female High Pressure (For use up to 20,000 PSI (44,000 ft./13,000 m)
Male Low Pressure (For use up to 4,000 PSI) (9,000 ft./2,700 m)
Male High Pressure (For use 4,000 PSI to 20,000 PSI (44,000 ft./13,000 m)
RMG-2-FS
RMG-2-MP
18/2 (AWG SO)
7
G-FLS-D/S
G-MLS-D/S
RMG-2-FSD-HP
RMG-MPD-LP
RMG-2-MPD-HP
RMG-3-FS
RMG-3-MP
18/3 (AWG SO)
7
G-FLS-D/S
G-MLS-D/S
RMG-3-FSD-HP
RMG-MPD-LP
RMG-3-MPD-HP
RMG-4-FS
RMG-4-MP
18/4(AIW SJO)**
5.6
G-FLS-D/S
G-MLS-D/S
RMG-4-FSD-HP
RMG-MPD-LP
RMG-4-MPD-HP

* D=Delrin, S=Stainless Steel

** For Kirby Morgan Helmets

Descriptions

SEA CON® RMG-4-FS - RMG Series In-Line Rubber Molded Connector - 4 Female Sockets with 18 in. Pigtail of 18 Gauge (SO/SJOOW AIW-K) Cable for KMDSI Helmets are the industry standard for Kirby Morgan® Helmets, Masks and diver umbilicals. Other typical uses are for underwater cameras, lighting systems, instrumentation. The Marsh and Marine® connectors are universally mateable to most major brands in this category.

Attachments
Videos

Additional Information

Brand SEA CON
Video No
FAQ
 

Product FAQ's

Ask a Question

  • After I solder my RMG waterproof connector to my umbilical, how do I waterproof the connection?
    Amron recommends using an 82-F1 inline splice kit to waterproof your RMG to umbilical connection. We chose this resin because it’s semi-flexible and extremely durable in the harsh underwater environment.
    How helpful was this information?

You may also be interested in the following product(s)