Request a Quote

Please fill out the following form below.

SEA CON RMG-WOC Series Marsh Marine Connectors Without Cable

Be the first to review this product

SKU: Select an option to display SKU

* Required Fields

$35.00

  • SEA CON RMG-WOC Series In-Line Rubber Molded Connector Only - No Cable
  • SEA CON RMG-WOC Series In-Line Rubber Molded Connector Only - No Cable
  • SEA CON RMG-WOC Series In-Line Rubber Molded Connector Only - No Cable

SEA CON RMG-WOC Series In-Line Rubber Molded Connector Only - No Cable

Double click on above image to view full picture

Zoom Out
Zoom In
Overview

Specifications

  • Material: Special Neoprene, Molded
  • Contacts: Copper Alloy, Hard Gold Plated per ASTM-B-488
  • Voltage Rating: 600 VDC-contact factory for higher voltage requirements
  • Pressure Rating, Mated: up to 20,000 psi
  • Max Amps: 5.6
  • No Cable - This series is for the Connector only without cable.
Ordering Information (Please contact your Amron Representative for connectors not listed)
In-Line Connector
Locking Sleeves
Dummy Plugs
Female Socket
Male Pin
Female*
Male*
Female High Pressure (For use up to 20000 PSI) (44,000 ft./13000m)
Male Low Pressure (For use up to 4000 PSI) (9,000 ft./2,7000 m)
Male High Pressure (For use up to 20000 PSI) (44,000 ft./13000 m)
RMG-2-FS-WOC
RMG-2-MP-WOC
G-FLS-D/S
G-MLS-D/S
RMG-2-FSD-HP
RMG-MPD-LP
RMG-2-MPD-HP
RMG-3-FS-WOC
RMG-3-MP-WOC
G-FLS-D/S
G-MLS-D/S
RMG-3-FSD-HP
RMG-MPD-LP
RMG-3-MPD-HP
RMG-4-FS-WOC
RMG-4-MP-WOC
G-FLS-D/S
G-MLS-D/S
RMG-4-FSD-HP
RMG-MPD-LP
RMG-4-MPD-HP

* D=Delrin, S=Stainless Steel

Descriptions

SEA CON® Marsh & Marine® RMG Series Waterproof Connectors are the industry standard for Kirby Morgan Helmets, Masks, and Diver Umbilicals. Other typical uses are for underwater cameras, lighting systems, and instrumentation. The Marsh Marine connectors are universally mateable to most major brands in this category.

Male in-line connectors allow for in-line mated sets not requiring bulkhead penetration. In addition, the WOC (without cable) type connectors allow for field installation in the event that a connector is damaged while at sea and needs replacing, or for long cable lengths that make cable transportation cost prohibitive. This is also ideal when installing to a non-neoprene cable. A few WOC connectors are an essential item for any commercial diver’s tool box. Replacements are easy. Simply pull back the protective sleeve, solder the cable wires to the appropriate contacts and pull the sleeve back into place. Bonding is achieved by using polyurethane molding compounds with appropriate primers.

The time proven Rubber Molded Series is one of the most inexpensive lines and has been used on all types of underwater instrumentation including: underwater lighting, communications, ROV's, thermistor arrays, hydrophone arrays, and all types of sonar systems. The contacts are gold plated per ASTM-B-488 and the series is rated up to 20,000 psi in a mated condition.

To purchase the coresponding Locking Sleeves please reference the "Parts Tab" below.

For products not listed in the pull down menu, including right angle connectors, please contact Amron International to inquire about these items and to receive a quote.

Please reference the "Documents Tab" below for printable Manufacturer Technical Data.

Attachments
Videos

Additional Information

Brand SEA CON
Video No
FAQ
 

Product FAQ's

Ask a Question

No questions have been asked for this product. To ask a question please click the Ask a Question button and fill out the form. Thank you.