Request a Quote

Please fill out the following form below.

Perma-Cal PER-200FTM90A01 6-Inch Seawater Depth Test Gauge 0.25% Accuracy, 0-150 PSI

SKU: PER-200FTM90A01 Rate this product

List Price: $380.00

$311.60

Availability: Contact us for availability

Click to Enlarge Image

Overview

Features:

  • Accuracy: 1/4%
  • Dial Size: 6 in. Pnuemo Scale
  • Case Type: Front Flange ABS
  • Pressure Range: 350FSW/100MSW
  • Case Color: Black
  • Fitting Position: Rear
  • 1/4 in. NPT

Note: The dial size shown in the photos may not reflect the actual PSI range.

Description

The Perma Cal PER-200FTM90A01 6 in. Seawater Depth Test Gauge 0.25% Accuracy, 0-150 PSI features the Perma-Cal® direct drive which has a simple advantage over conventional C-tube gauges; there is only one moving part. No gears, linkages or springs to wear or break. Perma-Cal® gauges maintain their structural integrity and accurate calibration in the most demanding environments even during prolonged and rugged use. Perma-Cal® direct drive pressure gauges provide the lowest cost of ownership by giving the best value in durability, reliability and accuracy.

Note: The dial size shown in the photos may not reflect the actual PSI range.

Videos

Additional Information

Brand Perma-Cal
Video No
FAQ
 

Product FAQ's

Ask a Question

  • Do Perma-Cal gauges conform to any standard and do they come with any certs?

    Yes, Perma-Cal gauges conform to ASME B40.1 and come with a calibration cert traceable to NIST. 

    How helpful was this information?

  • I will be using my gauge inside a submarine and would like to know if I can expose my gauge to seawater to give me a depth reading?
    Yes, you can expose the internal components to seawater but you will reduce the gauge life expectancy. However, if you order your gauge with Nicrobraze, the life of the gauge will be extended by several years.
    How helpful was this information?

  • What is Nicrobraze?
    Nicrobraze is a type of filler metal used during the brazing process. Nicrobraze is more corrosion resistant compared to standard silver solder so when a gauge is going to be used in a corrosive environment, the manufacturer recommends switching over to this type of soldering material.
    How helpful was this information?