Request a Quote

Please fill out the following form below.

Analox SDAPBBNXA SDA CO2 Monitor - Panel Mount - 5000ppm in N2

Be the first to review this product

SKU: SDAPBBNXA

$5,452.00

Availability: Contact us for availability

  • Analox SDAPBBNXA SDA CO2 Monitor - Panel Mount - 5000ppm in N2
  • Analox SDAPBBNXA SDA CO2 Monitor - Panel Mount - 5000ppm in N2
  • Analox SDAPBBNXA SDA CO2 Monitor - Panel Mount - 5000ppm in N2

Analox SDAPBBNXA SDA CO2 Monitor - Panel Mount - 5000ppm in N2

Double click on above image to view full picture

Zoom Out
Zoom In
Overview

Features

  • Easily configured
  • Interchangeable sensors and software allowing greater flexibility
  • Available as either a panel or rack mount analyzer

Specifications

  • Range: 0 to 5,000ppm in N2
  • Display resolution: 1ppm CO2
  • Alarms: 2 x high going (fully adjustable)
  • Pressure range: 700 to 1,300 mBar
  • Recommended flow rate: 0.2 to 1.0 liter/minute
  • Panel mount
Descriptions

The Analox SDA CO2 offers users the latest digital technology in commercial diving gas detection.

The Analox SDA series is a range of fixed external chamber analyzers used to control levels of gases such as oxygen and carbon dioxide. The new products are designed to be more easily configured to meet the users’ needs, with interchangeable sensors and software.

Attachments
Videos

Additional Information

Brand Analox
Video No
FAQ
 

Product FAQ's

Ask a Question

  • I don’t see that the SDA has any calibration pots – how are they calibrated?

    The SDA has a very intuitive rotary encoder dial, this coupled with the familiar retro toggle switches and appropriate zero and span gases will mean that these analyzers are easier to calibrate than others you may have used.

    How helpful was this information?

  • My current 0-100% Analox 1000 O2 monitor also has a battery back up, does the SDA offer this?

    The SDA does not offer a battery back up option as the vast majority of diving systems now have un-interrupted power supply.

    How helpful was this information?

  • My current monitors run off a mains power supply – is this a problem when considering an SDA?

    Not at all – each SDA is configured for 24VDC power as standard but you can purchase an Analox 24VDC mains power supply which is capable of powering 2 SDA modules and their accessories.

    How helpful was this information?

  • Are the SDA DNV & IMCA compliant?

    Yes, the SDA comply with DNVs offshore standard E402 and IMCA guidelines in that they comply with the accuracy and feature requirements.

    How helpful was this information?

  • Can I use the existing O2 sensors I have with the SDA O2?

    No, the O2 sensors used with the SDA are new and intelligent sensors which will signal when they need calibrating and changing. They also have the added benefit of having the ability to be positioned as far away from the monitor as you wish; unlike current analogue systems.

    How helpful was this information?

  • I currently have an Analox 1000 (O2) monitor and an Analox 5001 (CO2) monitor in my panel. Will the SDA units fit into the same panel spaces?

    Yes. The SDA O2 will fit directly into the existing panel space.

    If your current 5001 CO2 unit is a combined panel mount you will also need the “5001 Compatibility Plate” to mount the SDA rack monitor and CO2 module. If your current 5001 CO2 unit is a combined rack mount, the SDA will fit direct.

    How helpful was this information?

  • How reliable is the CO2 sensor used in the SDA?

    The SDA CO2 uses the new Analox 5S3 transducer. This twin beam, highly precise infra-red sensor will offer un-rivaled stability and reliability, requiring minimal adjustments during regular saturation diving operations.

    How helpful was this information?

  • I have a USN version 5001 – is your new SDA CO2 retro-fittable?

    Yes, please contact us to discuss the special version of the compatibility plate you will require along with the range of the unit. Please note that the SDA is not USN codified.

    How helpful was this information?

  • Can the SDA Oxygen Analyzer be ordered with a paramagnetic sensor?

    No. 

    How helpful was this information?

  • What is the configuration software for?

    You are able to buy an SDA monitor configured for O2 without the sensor. If you then purchase the configuration software you can then configure the unit to be used as a CO2 unit. This is designed to offer users more flexibility when managing spares.
    You can also access other features on this CD such as training videos and other features such as the on screen naming of your monitor to correspond with a particular chamber or lock.

    How helpful was this information?

  • Datalogging is a new feature - how long does the unit log for?

    90 days of continual logging. The oldest data is then over-written.

    How helpful was this information?

  • Is it possible to enable the datalogging feature using the software provided with my analyzer?

    No, unfortunately the datalogging feature can only be added at the factory.  

    How helpful was this information?

  • Our panel is situated in a very low light area – can the screen brightness be adjusted?

    Yes – this option is on the basic on screen menu accessed with the buttons on the monitor itself.

    How helpful was this information?