Request a Quote

Please fill out the following form below.

Kirby Morgan 525-112 Pull Pin Sleeve Kit

SKU: 525-112 Rate this product

    Availability: Contact us for availability

    Restrictions / Notifications

    • Reseller Restriction
      Due to vendor restrictions, this item cannot be sold to a reseller. If you are a reseller, please call us at 760-208-6500 or email for more details.

    Click to Enlarge Image


    Pull Pin Sleeve Kit - P/N: 525-112 Includes:

    • (2) Pull Pin Sleeves - P/N: 550-232
    • (1) Instruction Sheet

    The Kirby Morgan 525-112 Pull Pin Sleeve Kit has been designed to help prevent the knob of the sealed pull pin from catching or snagging on objects or protrusions.

    Kirby Morgan strongly recommends that the tender, stand by diver, or a least a second person, ALWAYS pre-dive check the sealed pull pins to ensure that both of the sealed pull pins are fully latched and in the closed position prior to each and every dive.

    Note: Kirby Morgan 550-232 Sleeves for the sealed pull pins now marked with a groove, effective immediately (April 27, 2015). When used with the stainless steel helmets, Kirby Morgan recommends shortening the sleeves (550-232) a small amount, for improved fit and function. A groove marking the best area to trim the sleeve is now machined into the material around the small end of the sleeve, as shown on Bulletin #5 of 2015 in the Attachments tab.

    Note: This kit contains instructions on trimming when used with the Kirby Morgan stainless steel helmets. Trimming is NOT necessary when used with the fiberglass helmets. Kirby Morgan does not recommend trimming earlier sleeves that do not have the machined groove.


    Additional Information

    Brand Kirby Morgan
    Video No

    Product FAQ's

    Ask a Question

    No questions have been asked for this product. To ask a question please click the Ask a Question button and fill out the form. Thank you.