- Water Capacity: 2.50 gal. (9.5 liters)
- Maximum Pressure: 200 psi (13.7 bar)
- Maximum Depth: 225 FSW
- Dimensions: 7.0 in. Dia. x 30 in. H (18 cm x 76 cm)
- Empty Weight: 6.50 lbs. (2.95 kg)
The Amron International Model 240 Hyperbaric Water Based Fire Extinguisher is a modified Class 2-A extinguisher and is tested to ANSI/UL711 and 626 standards and is designed for the pressures and confines of a hyperbaric chamber. The Model 240 has been fully tested and approved for use in all U.S. Navy standard double lock chambers.
In actual operation, the Amron International Model 240 Hyperbaric Water Based Fire Extinguisher is filled with potable water and then pressurized to 150 psig. The unit comes complete with a fill valve, pressure gauge and a pressure relief valve that is factory set at 173 psig to prevent over-pressurization. The Model 240 can be used in a chamber pressurized to a maximum depth of 225 FSW. If the unit is activated at the maximum depth, and held until the water is exhausted, the pressure inside the extinguisher will equal the chamber pressure. With the chamber and extinguisher at equilibrium, the fire extinguisher cannot implode or crush.
Brand Amron International Video No
Does the MODEL-240 Fire Extinguisher require any maintenance?
Yes, inspect monthly or at more frequent intervals when circumstances require. Make sure the hose and nozzle are unobstructed. Gauge pressure must be in operable range 0-200 PSIG. Lockpin must be in place. A visual inspection should be preformed annually and a hydrostatic test preformed every 5 years. Fire extinguisher laws vary in different regions of the world please check the laws that govern your area.
Has the Model-240 Fire Extinguisher been classified by ABS, Lloyds, DNV, Germanischer Lloyd, or any other classifying agency?
No. However, it was tested and approved for use by the U.S. Navy.