- Exhalation is vented directly to ambient atmosphere through a mask check valve
- Weight: 1.95 lbs.
The Avox Series 803600 Duo Seal Inhalator is designed for dry atmosphere decompression in a recompression chamber and other applications where it is desirable to breathe mixtures other than ambient atmosphere and is not critical if the exhaled gas is vented directly to the chamber atmosphere. This inhalator is used for surface decompression of persons in a recompression chamber and vents the exhaled gas directly to the chamber atmosphere.
The demand regulator assembly provides breathing gas on demand (inhalation). The regulator is designed to operate with a constant inlet pressure of 65 - 125 psi over chamber pressure. You can set the over bottom pressure to the pressure that meets your system breathing requirement. Setting the over bottom pressure over 100 psig may result in labored breathing resistance. Under normal conditions, the regulator will provide adequate flow rates at acceptable breathing resistance. The demand regulator can be adjusted to free-flow by turning the control knob clockwise until desired free flow is achieved.
Brand Avox Video No
Is the female side of the quick disconnect included with the 803600 Inhalator mask?
What is the maximum inlet pressure of the 801804-00 Pressure Reducing Regulator?
What type of inlet connection is provided with the 801804-00 Pressure Reducing Regulator?
Is the 801804-00 Pressure Reducing Regulator oxygen cleaned to MIL-STD 1330D?
What does BIBS stand for?
Built-in Breathing System