- Heavy duty nylon used on the outer surface of the suit
- Zippers are made from heavy duty Delrin
- Valve is made from marine grade brass and non-corrosive plastic
- DUI hot water suits can be rolled to a small size for transfer
- DUI material readily withstands rapid pressurization and depressurization
- Optional Non Return Valve
The simple, yet functional design of DUI’s Hot Water Suits ensures dependable performance, dive after dive. The zippers are made from heavy duty Delrin, while the valve is made from marine grade brass and non-corrosive plastic. The valve allows the flow of hot water to be diverted away from the suit whether you are on the surface or underwater. This is an especially useful feature if you are standing by for a surface supplied dive, or while you are lifted from the water in a stage after your dive.
DUI Hot Water Suits are made exclusively from DUI’s tough material. This material earned its workhorse reputation in the commercial diving industry and is exceptionally resistant to tears, scrapes, and punctures. The heavy duty nylon used on the outer surface of the DUI Hot Water Suit helps to resist abuse, yet gives the material excellent stretch. This makes the suit is easy to don and remove, even within the confines of a small chamber or entrance lock.
When divers are in saturation on a continuous basis, DUI hot water suits can be rolled to a small size for transfer in and out of the system through most medical locks. The DUI material readily withstands rapid pressurization and depressurization.
For long dives in cold water, even if the depth is somewhat shallow, the hot water suit is a better choice than a dry suit. With a hot water suit and the proper equipment topside, the temperature level can be varied as the diver’s work load changes during the dive. The principle of the DUI hot water suit is very simple. Hot water is pumped to the diver’s suit from the surface via an insulated hose. The hot water enters the suit through an on/off valve at the diver’s waist. From the valve, the hot water is distributed throughout the suit by perforated tubes down each arm and leg. Additional tubes flow hot water across the chest and back. The ankles, wrists, and neck of the suit are open. Since the hot water supply is continuous, the hot water flushes through the suit as freshly heated water arrives from the surface.
Diving Unlimited International suits have been worn on thousands of deep dives around the world. Their suits have been used by military, commercial, and scientific mixed gas and air divers, for both surface supplied and saturation diving.
Brand Diving Unlimited Video No
Does the quick release socket that would be installed on the diver’s hot water hose come with the suit?
No, the suit comes with the male plug. In most cases, this side of the quick disconnect comes installed on the diver’s umbilical. If you need to purchase a spare please visit our product page for this item.
What is the maximum gallons per minute I can send down to the diver’s hot water suit.
Per the manufacturer’s recommendation, 9 gallons per minute.
Does the quick release plug come with the suit?
Yes, it comes installed on the on/off control valve.