Request a Quote

Please fill out the following form below.

Kirby Morgan 310-035 EXO Full Face Mask Hood - Cold Water - Small

SKU: 310-035 Rate this product

    Availability: Contact us for availability

    Restrictions / Notifications

    • Reseller Restriction
      Due to vendor restrictions, this item cannot be sold to a reseller. If you are a reseller, please call us at 760-208-6500 or email for more details.

    Click to Enlarge Image



    Around the Head
    22 1/2 in.
    23 1/2 in.
    24 1/2 in.
    At Chin
    21 in.
    21 1/2 in.
    22 in.
    At Neck
    15 in.
    16 in.
    17 in.



    KMDSI manufacturers a hood perfectly tailored to the EXO Full Face masks. It has thinner face seal material on the front as opposed to the thicker material of normal types of hoods, for better fit and comfort. Cold Water (CW) versions are also available. These have a large bib that tucks into the divers wet suit.

    The type of hood that a diver chooses may have direct bearing on the fit and comfort of the EXO. Excess material on the chin and or jaw will keep the mask from positioning properly and possibly cause jaw fatigue. This may also prevent the diver's face from getting far enough into the mask for equalizing by pinching the nose.

    When using a dry suit with a latex hood, no adjustment should be needed. However, if the hood covers too much of your face, it may be necessary to trim a small amount of rubber off the chin on the hood. If using a neoprene wet suit hood, you may want to trim material from the cheek bone downward to under the front part of the chin.


    Additional Information

    Brand Kirby Morgan
    Video No

    Product FAQ's

    Ask a Question

    No questions have been asked for this product. To ask a question please click the Ask a Question button and fill out the form. Thank you.