-
Call Us
(877) 462-6700
(760) 208-6500
-
Don't want to call?
-
Service Questions
- Overview
-
Features
- High strength - Very resistant to abrasion, UV resistant, and not affected by petro-chemicals
- Bag leaves manufacturing facility equipped with all necessary hardware and is ready for immediate use
- Tested prior to shipping and meets rigorous U.S. Department of Defense requirements
- Brass quick disconnect for inflation
- Equipped with pressure relief valves - set to release at 2.5 PSI above ambient pressure
Commercial Lift Bags (open bottom)Part No.Lift CapacityHeightLengthWeightAttachment PointsEFB-200200 lbs (100 kg)2 ft. 5 in. (0.74 m)3 ft. 2 in. (0.97 m)12 lbs (5.4 kg)1 BottomEFB-500550 lbs (250 kg)2 ft. 8 in. (0.82 m)4 ft. 3 in. (1.31 m)20 lbs (9.1 kg)2 Top 1 BottomEFB-10001100 lbs (500 kg)3 ft. 8 in. (1.13 m)4 ft. 3 in. (1.31 m)32 lbs (14.5 kg)2 Top 1 BottomEFB-20002200 lbs (1000 kg)4 ft. 7 in. (1.41 m)5 ft. (1.54 m)50 lbs (22.7 kg)2 Top 1 BottomEFB-40004400 lbs (2000 kg)5 ft. 9 in. (1.77 m)6 ft. 3 in. (1.92 m)70 lbs (31.7 kg)2 Top 1 BottomEFB-60006600 lbs (3000 kg)6 ft. 4 in. (1.94 m)9 ft. 4 in. (2.87 m)90 lbs (40.8 kg)3 Top 1 Bottom - Descriptions
-
Subsalve Enclosed Flotation Commercial Lift Bags are very adaptive to a broad range of flotation needs where objects are to be floated close to the surface. EFB (Enclosed Flotation Bags) totally - enclosed “pillow” shape allows the bag to be used in any position upright or flat, outside or inside of structures. There are a multitude of rigging combinations. Perfect for vessel salvage, automobile recovery and emergency rotation systems for ships, aircraft, submersibles and Remotely Operated Vehicles.
Subsalve Enclosed Flotation Commercial Lift Bag's design incorporates a heavy nylon lift harness built into the body of the lift bag, and has a safe working ratio of 6:1. All Subsalve Enclosed Flotation Commercial Lift Bags can be used with a single pick point with the shackle supplied on the bottom of the bag. The Subsalve Enclosed Flotation Commercial Lift Bags can also be inverted to use the two stainless steel rings on the top of the bag with two pick points.
Subsalve Enclosed Flotation Lift Bags are equipped with all necessary hardware and are ready for immediate use.
Note: All Subsalve Lift bags meet IMCA (International Marine Contractor's Association) standards. Certification can be provided upon request.
- Videos
-
Brand Subsalve Video No - FAQ
-
Product FAQ's
-
How do I dump the air out of my lift bag?
There is a black Plunger Dump Valve on the top of the lift bag that releases the air from the lift bag. You can control the ascent of the lift bag by pulling the lanyard that is connected to this valve.
If you are using an Enclosed Floatation bag or Salvage Pontoon, you can find the Plunger Dump Valve on the side or corners of the lift bag.
-
Does this lift bag meet the IMCA D-016 Air Lift Bags standard?
Yes.
-
You have no items in your shopping cart.
