<![CDATA[Amron International Blog]]> http://www.amronintl.com/blog/ Fri, 11 Jul 2014 15:58:25 +0000 http://cdn.amronintl.com/skin/frontend/base/default/images/rsslogo.jpg <![CDATA[Amron International Blog]]> http://www.amronintl.com/blog/ Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[Amron is the Largest Stocking Distributor for Kirby Morgan]]> http://www.amronintl.com/blog/amron-largest-stocking-distributor-for-kirby-morgan/ Amron International is the Largest Stocking Distributor for Kirby Morgan products and parts, including but not limited to:

 

Commercial Diving Helmets

Band Masks

Full Face Masks

Air Control Systems

Regulators

Neck Dams

 

Check out our Kirby Morgan brand page and stock up on your favorite dive gear today!


Kirby Morgan


]]>
Thu, 10 Jul 2014 19:32:25 +0000
<![CDATA[Kirby Morgan BandMask 18 Free Watch Promo]]> http://www.amronintl.com/blog/kirby-morgan-bandmask-18-free-watch-promo/ Our next promotion is here!

 

Buy a Kirby Morgan BandMask 18 with Male Waterproof Connector and receive a

FREE Kirby Morgan Watch today!


Kirby Morgan BandMask 18

Click here to visit KM BandMask 18 page to view promotion.

 

Offer is good while supplies last :)


]]>
Tue, 08 Jul 2014 15:20:38 +0000
<![CDATA[Kirby Morgan 17B Diving Helmet Free Watch Promo]]> http://www.amronintl.com/blog/kirby-morgan-17b-diving-helmet-free-watch-promo/ Summer is here!  So is our newest promotion!

 

Buy a Kirby Morgan Superlite 17B Diving Helmet and receive a

FREE Kirby Morgan Watch today!


Kirby Morgan Superlite 17B Commercial Diving Helmet

Click here to visit KM 17B Helmet page to view promotion.


Offer is good while supplies last :)


]]>
Wed, 02 Jul 2014 18:04:13 +0000
<![CDATA[Kirby Morgan Bulletin 5: Unauthorized Resurfacing of Fiberglass Shells & Frames]]> http://www.amronintl.com/blog/kirby-morgan-bulletin-unauthorized-resurfacing-of-fiberglass-shells-and-frames/ Subject: Unauthorized “Painting” (resurfacing) Helmet Shells & KMB 18 Frames

 

Products affected: All fiberglass helmets / KMB 18 BandMasks.

 

Complete re-gelcoating of Kirby Morgan fiberglass helmet shells & KMB 18 frames MUST be done by a Kirby Morgan factory trained & approved facility only, or by Kirby Morgan.

 

The major reasons for this are:

 

  • Damages can be hidden from view by those who re-coat the part but are not qualified to first inspect for damages.
  • Critical areas such as O-ring sealing surfaces can be easily compromised by untrained individuals.
  • Proper inspection of the part is no longer possible when surfaces are covered.
  • Kirby Morgan cannot guarantee the part, or work performed on the part, when done by anunauthorized party.

 

For the reasons above, Kirby Morgan, along with its representatives, will not perform work on fiberglass helmet shells or KMB 18 frames with unauthorized re-gelcoats or re-surfacings. These shells and frames are unserviceable and will be condemned.

 

Note: Please be aware that if the unit is 20 years or older, it may not be eligible for a complete, cosmetic re-gelcoat. However, functional repairs may still be an option. Also, please be aware that three is the maximum number of times a shell or frame may be re-gelcoated.

 

For those customers that feel they must have a custom, decorative design painted or gelcoated ontotheir helmet shell (or frame): This is NOT recommended!

 

Do not compromise the quality or serviceability of your Kirby Morgan life support equipment.

 

Thank you.


For those customers that feel they must have a custom, decorative design painted or gelcoated ontotheir helmet shell (or frame): This is NOT recommended!


Click to view full Kirby Morgan Bulletin

]]>
Wed, 25 Jun 2014 19:15:19 +0000
<![CDATA[Kirby Morgan Bulletin 4: Cleaning And Brightening Stainless Steel Shells]]> http://www.amronintl.com/blog/kirby-morgan-bulletin-cleaning-and-brightening-stainless-steel-shells/ Products affected: Stainless Steel Helmet Shells (P/N 560-517) and Pods (P/Ns 560-556, 560-516)

 

Kirby Morgan Dive Systems has found, tested, and approved a set of products for cleaning and brightening the stainless steel shells (P/N 560-517) and Pods (P/Ns 560-556, 560-516) of the KM 77, KM 37SS and KM 97 Helmets. These parts are composed of 316L grade, highly corrosive resistant stainless steel.

 

WALTER SURFACE TECHNOLOGIES www.walter.com 

  • Produces two products, E-NOX Clean and UNO SF, that when used in a two-step process,remove mineral deposits, “rust” like discolorations, foreign material oxidation, light greaseand also clean and brighten the stainless steel helmet shells.
  • These products are available world-wide with the exception of China.

Below are the links to the two products Kirby Morgan recommends (E-NOX Clean and UNO SF, by WalterSurface Technologies).

 

Please follow the manufacturer’s recommendations regarding use.

 

Step #1 for your Stainless Steel Shell or Pod

Use E-NOX Clean - Cleaner/Brightener Gel

Here is the link: http://www.walter.com/Walter/en-us/bio-circle/industrial-cleaning-degreasing/cleaners-aqueousacidic/e-nox-clean

 

Step #2 for your Stainless Steel Shell or Pod

Use UNO SF (as a neutralizer) – High Strength Degreaser

Here is the link: http://www.walter.com/Walter/en-us/bio-circle/industrial-cleaning-degreasing/cleaners-aqueousalkaline/uno-s-f

 

Or, if you experience any obstacles with the links above, Go to the Walter Surface Technologie swebsite, www.walter.com , then go to Products > Bio-Circle > Industrial Cleaning & Degreasing > Cleaners, aqueous, acidic for E-NOX. Go to Cleaners, aqueous, alkaline for UNO SF. Or phone customer service (USA) 800-522-0321.

 

NOTE / Tips:

Step #2 must be included. Always neutralize after cleaning.

Leaving the cleaning cloth with E-NOX on a discolored spot for ten to twenty minutes mayimprove results.

 

To purchase, please contact WALTER SURFACE TECHNOLOGIES. Kirby Morgan does not sellthese products.

 

Thank you.


Click to view full Kirby Morgan Bulletin
]]>
Wed, 25 Jun 2014 19:05:18 +0000