products per page

Items 1-4 of 244 total

Bulletin #10 of 2015 - August 25, 2015

Subject: Change to Products


Helmet and BandMask® Regulators Now Packaged and Sold as "Kits"

 

Products Affected by Packaging as Kits:

305-040 EXO® BR Regulator

505-027 SuperFlow® "B" Regulator Assembly

505-026 "A" Regulator Assembly

505-069 350 (1 inch Tube)

505-278 REX® Regulator Assembly

 

Regarding Helmet and Band Mask® regulators, we have improved their overall packaging and presentation. Where needed, tie wraps or other parts are included as well as a warranty card. These changes make the regulators into kits instead of them simply being “a part”. Please see page two for the regulators with their corresponding, new “kit” part numbers.

 

For these regulators, order the new Regulator Assembly Kit:

305-040 EXO® BR Regulator               325-772 EXO® BR Regulator Assembly Kit

505-027 SuperFlow® "B" Regulator     525-773 SuperFlow® "B" Regulator Assembly Kit

505-026 "A" Regulator                          525-777 "A" Regulator Assembly Kit

505-069 SuperFlow® 350 Regulator    525-771 SuperFlow® 350 Regulator Assembly Kit

505-278 REX® Regulator                     525-774 REX® Regulator Assembly Kit

 

Click to view full Kirby Morgan Bulletin

Read More
0 Comments | Posted in Home Diving/SCUBA By Rachel Mathias

Amron 2015 Annual Photo Contest


Attention all divers! It's that time of year again...for our Annual Photo Contest!


Enter for your chance to win a $500 gift card and be featured in our 2016 Amron Calendar!


One lucky Grand Prize Winner will have their photo on the cover of our Amron Calendar and will also win a $500 gift card.


12 Place Winners will each receive a $150 gift card and have their photo featured as the main photo for one month in our calendar!


All you have to do is submit your unique commercial diving action photos to photos@amronintl.com by October 23rd, 2015.


For all the details, please see the link below: http://www.amronintl.com/photocontest2015

Good luck photographers!

Read More
0 Comments | Posted in Home Diving/SCUBA By Rachel Mathias

Bulletin #9 of 2015 - July 9, 2015

Subject: Change to Products


350-032 Main Tube is Replaced by 350-143 Main Tube

 

Products Affected by Change to 350-032 Main Tube:

350-032 Main tube, BR

505-278 REX® Regulator Assembly

305-040 Balanced Regulator Assembly, EXO-BR®

 

This bulletin is to inform you that the Main tube, 350-032, used in the balanced REX® & EXOBR® regulators is now being manufactured of stainless steel (previously chromed brass). With this improvement it has been issued a NEW PART NUMBER, 350-143 Main Tube and is stamped with an “S” instead of a “B”.

 

Click to view full Kirby Morgan Bulletin

Read More
0 Comments | Posted in Home Diving/SCUBA By Rachel Mathias

Bulletin #8 of 2015 - July 2, 2015

Subject: Caution Bulletin


USE OF AFTER MARKET OR NON-GENUINE KIRBY MORGAN® PARTS


The purpose of this bulletin is to CAUTION against using non-genuine Kirby Morgan parts. Kirby Morgan equipment has been designed, built and tested to exacting specifications for proper fit, form and function and your safety! All components of Kirby Morgan® Helmets and BandMasks® are CR and CE compliant.

 

Be aware that even something as “simple” as a Kirby Morgan® Head Cushion has undergone stringent testing in order to gain CE approval (very expensive) so that it can be sold in CE countries. The head cushion has also gone through trials, analysis and evaluation for CR compliance and military approval.

(Ref. p/n 510-754 & 510-521 Head cushions).

 

A cheaper, un-tested, NON-GENUINE Head Cushion can present the danger of foam that could off-gas toxic fumes or exude toxic liquids if wet!

 

Kirby Morgan® carefully sources the foam we use from special vendors to be sure there is no possibility of off-gassing or toxicity within the foam or other materials. This is just one example. Again, all components of Kirby Morgan® Helmets and BandMasks® are CR and CE compliant.


After-market products are not CR or CE marked and use of these products will void warranty plus, helmets and BandMasks® with non-genuine parts will not pass inspection.

 

Click to view full Kirby Morgan Bulletin

Read More
0 Comments | Posted in Home Diving/SCUBA By Rachel Mathias
products per page

Items 1-4 of 244 total