- Easily configured
- Interchangeable sensors and software allowing greater flexibility
- Available as either a panel or rack mount analyzer
- Range: 0 to 5,000ppm, 0 to 10,000ppm
- Display resolution: 1ppm CO2
- Alarms: 2 x high going (fully adjustable)
- Pressure range: 700 to 1,300 mBar
- Recommended flow rate: 0.2 to 1.0 liter/minute
The new Analox SDA CO2 will offer users the latest digital technology in commercial diving gas detection.
The Analox SDA series is a range of fixed external chamber analyzers used to control levels of gases such as oxygen and carbon dioxide. The new products are designed to be more easily configured to meet the users’ needs, with interchangeable sensors and software.
The Analox SDA CO2 is available in either panel or rack mount format.
Brand Analox Video No
How reliable is the CO2 sensor used in the SDA?
The SDA CO2 uses the new Analox 5S3 transducer. This twin beam, highly precise infra-red sensor will offer un-rivaled stability and reliability, requiring minimal adjustments during regular saturation diving operations.
Our panel is situated in a very low light area – can the screen brightness be adjusted?
Yes – this option is on the basic on screen menu accessed with the buttons on the monitor itself.
I don’t see that the SDA has any calibration pots – how are they calibrated?
The SDA has a very intuitive rotary encoder dial, this coupled with the familiar retro toggle switches and appropriate zero and span gases will mean that these analyzers are easier to calibrate than others you may have used.
I have a USN version 5001 – is your new SDA CO2 retro-fittable?
Yes, please contact us to discuss the special version of the compatibility plate you will require along with the range of the unit. Please note that the SDA is not USN codified.
What is the configuration software for?
You are able to buy an SDA monitor configured for O2 without the sensor. If you then purchase the configuration software you can then configure the unit to be used as a CO2 unit. This is designed to offer users more flexibility when managing spares.
You can also access other features on this CD such as training videos and other features such as the on screen naming of your monitor to correspond with a particular chamber or lock.
Datalogging is a new feature - how long does the unit log for?
90 days of continual logging. The oldest data is then over-written.
My current monitors run off a mains power supply – is this a problem when considering an SDA?
Not at all – each SDA is configured for 24VDC power as standard but you can purchase an Analox 24VDC mains power supply which is capable of powering 2 SDA modules and their accessories.
Are the SDA DNV & IMCA compliant?
Yes, the SDA comply with DNVs offshore standard E402 and IMCA guidelines in that they comply with the accuracy and feature requirements.
I currently have an Analox 1000 (O2) monitor and an Analox 5001 (CO2) monitor in my panel. Will the SDA units fit into the same panel spaces?
Yes. The SDA O2 will fit directly into the existing panel space.
If your current 5001 CO2 unit is a combined panel mount you will also need the “5001 Compatibility Plate” to mount the SDA rack monitor and CO2 module. If your current 5001 CO2 unit is a combined rack mount, the SDA will fit direct.
Is it possible to enable the data-logging feature using the software provided with my analyzer?
No, unfortunately the data-logging feature can only be added at the factory.