-
Call Us
(877) 462-6700
(760) 208-6500
-
Don't want to call?
-
Service Questions
- Overview
-
Features
- CE Registered
- Soft vinyl hood with extra large optical quality window
Sterilization
- Please reference the Cleaning Manual located in the Attachments tab on this web page for recommended cleaning instructions
- Hood Part Number 8891-010 can also be sterilized using either gas sterilization method listed below; however multiple cycles of gas sterilizing over time will shorten the products working life:
- Low - 4 hours at 100 degrees with an aeration time of 36 hours
- High - 1 hour at 130 degrees with an aeration time of 12 hours
Caution: Federal law (USA) restricts this device to sale by or on the order of a physician or licensed practitioner.
- Descriptions
-
The Amron International 8891-010 Oxygen Treatment Hood with Optical Window (CE Registered) is the pre-eminent hood on the market and easily sets the standard for all others.
- Attachments
-
Amron Oxygen Treatment Hood 8891 Datasheet (Size: 977.7 KB) Amron Oxygen Treatment Panel Parts Detail (Size: 122.2 KB) - Videos
-
Brand Amron International Video - FAQ
-
Product FAQ's
-
Can I use my Sterrad ® Sterilization system to sterilize my 8891 Oxygen Treatment Hood?
Amron has not preformed any testing to determine whether or not you can use this type of process to sterilize our Oxygen Treatment Hood. Amron recommends using SaniZide Plus as a convenient, fast-acting intermediate level germicidal disinfectant, cleaner, and deodorizer.
-
Do you make the 8891-010 Oxygen Treatment Hood in different sizes?
No, we currently only offer this one size.
-
Can I autoclave the my Oxygen Treatment Hood?
No. Amron recommends SaniZide Plus as a convenient, fast-acting intermediate level germicidal disinfectant, cleaner and deodorizer. SaniZide Plus is delivered ready to use and requires no mixing.
-
We are trying to sort out a cleaning regime for our Oxygen treatment hoods. The method as stated on the general instructions does not suit our unit due to the clean area that would be required to drip dry the hoods. Is there any other approved method of c
We only have two methods approved for cleaning.
1) The first is spraying Sanizide and letting the hood sit for 10 minutes.
2) The second is gas sterilization using the method below:
- Low - 4 hours at 100 degrees with an aeration time of 36 hours
- High - 1 hour at 130 degrees with an aeration time of 12 hours
Using the gas sterilization will shorten the life of the hood but we have many customers that use it and are very happy with the results.
-
Can I purchase an Oxygen Treatment Hood for private use?No, Federal law (USA) mandates that Amron can only sell this device to physicians and/or licensed clinical practitioners.
-
You have no items in your shopping cart.
