Request a Quote

Please fill out the following form below.

Analox 6000 Depth Monitor

Be the first to review this product



Availability: Contact us for availability

  • Analox 6000 Depth Monitor SA1A15K1AP

Analox 6000 Depth Monitor SA1A15K1AP

Double click on above image to view full picture

Zoom Out
Zoom In


  • Familiarity: Commonality of the 1000 series allows for easy operation
  • Adjustable Alarms: Both the audible and visual alarms can be adjusted
  • Easy Read Display: Allows for quick interpretation by the user

Analox 6000 Depth Monitor Includes

  • Trim Tool: Part Number 000-0181
  • Pressure Sensor
  • Power Lead
  • Test Certificate and Manual


  • Range MSW: 0.0-100, 0.0-600
  • Range FSW: 0.00-300, 0.0-2000
  • Range bar: 0.000-10, 0.0-60
  • Sensor Type: Gauge pressure, Absolute pressure


Many more options are available for the Analox 6000 Depth Monitor. Please take a look at the 2011 Amron International Catalog page in the Documents Tab, or call Amron's award winning sales staff at (760) 208-6500 to help build your Analox 6000 Depth Monitor, get a quote, and place your order today!


The Analox 6000 Depth Monitor is available with a gauge pressure sensor in a choice of readouts for either feet of seawater (FSW), meters of seawater (MSW) or bar. The Gauge pressure sensor is recommended for monitoring chamber pressure; in this application the sensor would be mounted outside the chamber and supplied with an unregulated sample line from the chamber.

The Absolute pressure sensor is recommended for monitoring internal pressure inside the chamber or diving bell. The absolute pressure sensor is recommended for monitoring internal pressure inside the chamber or diving bell, in which case the sensor is mounted inside the chamber or diving bell, with electrical connections to the display panel provided through a penetrator. The Absolute pressure sensor is also available in an immersible version, for monitoring seawater pressure outside the diving bell (designated by the ‘W’ on the sensor type and location options).

The pressure sensor is a 4-20 Milliamp, two-wire transmitter and is extremely rugged. Both the Air and In Water sensors are supplied with a 2m cable ‘pig tail’ for connection in to a user supplied junction box.

Both the gauge and absolute sensors for Air monitoring, are available to a range of 40 barA. However if you have a specific requirement that requires a higher range, please contact us to discuss your requirements.


Additional Information

Brand Analox
Video No

Product FAQ's

Ask a Question

  • Can the immersible sensor be used with an open bottom bell?
    Yes, but you must indicate you want a sensor capable of operating in seawater at time of order.
    How helpful was this information?