Request a Quote

Please fill out the following form below.

Amron International 600 ft. Military 4-Part Taped Umbilical with Oxygen Fittings and Navy 5-Pin Male MS Surface Connector

SKU: 33HB1-MK21-MN-0-600 Rate this product

$5,500.18

Availability: Contact us for availability

Click to Enlarge Image

Overview

Includes

  • 4 part umbilical includes: 3/8 in. 33HB Divers Hose, 1/4 in. Pneumo Hose, CC1 Communications Cable, and 1/2 in. Nylon Lifeline
  • Oxygen fitting on both ends of the divers hose and on the surface end of the pneumo hose
  • 4 pin waterproof connector installed on the diver’s side of the communications cable
  • Navy 5-Pin MS connector on the surface end of the communications cable 
  • D-ring with shackle installed on the diver’s end and one D-ring installed on the surface end
  • Brass Tag
  • Tested with certification provided

Amron sells many different diving umbilical configurations. If you don’t see the configuration you need, please call our award winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!

Descriptions

The Amron International Commercial Diving Taped Umbilical is a 4 part umbilical that includes 3/8 in. 33HB Divers Hose, 1/4 in. Pneumo Hose, CC1 Communications Cable, and 1/2 in. Nylon Lifeline.

Oxygen fitting on both ends of the divers hose and on the surface end of the pneumo hose. 4 pin waterproof connector installed on the diver’s side of the communications cable and Navy 5-Pin MS connector on the surface end.

D-ring with shackle installed on the diver’s end and one D-ring installed on the surface end.

Amron sells many different diving umbilical configurations. If you don’t see the configuration you need, please call our award winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!

Videos

Additional Information

Brand Amron International
Video No
FAQ
 

Product FAQ's

Ask a Question

  • How often should I pressure test my umbilical?

    According to ADCI and IMCA you should pressure test your umbilical annually. Along with your annual pressure test, you should also consider preforming a pull-test on the fittings, thoroughly visually inspect each umbilical member, and clean the inside of the diver’s gas hose.   

    How helpful was this information?

  • Does Amron’s taped and spiral umbilical come with a 90 day warranty?

    No, umbilical’s and hoses are considered custom made equipment and are non-cancelable and non-returnable.  However, all umbilical’s are pressure and continuity tested before they leave Amron meaning there are no manufacturer defects in the hose or the fittings/connectors that were put on.

    How helpful was this information?

  • Which side of the diver’s umbilical should I install the umbilical sheath on?

    Diver’s side. 

    How helpful was this information?

Customers Who Bought This Item Also Bought