Request a Quote

Please fill out the following form below.

Gates 33HB Diver's Breathing Hose

Be the first to review this product

SKU: Select an option to display SKU

$3.04

  • Gates 33HB Diver's Breathing Hose

Gates 33HB Diver's Breathing Hose

Double click on above image to view full picture

Zoom Out
Zoom In
Overview

 Specifications

  • Nominal Dimensions
    • 3/8 in. I.D., 0.75 O.D.
    • 1/2 in. I.D., 0.94 O.D.
  • Braid: High tensile synthetic textile cord
  • Reinforcement: Braided, high tensile synthetic textile cord
  • Suction (in. Hg): 30
  • Minimum Burst: 4 to 1
  • Cover: Type A (Neoprene) black. All sizes perforated.
  • Tempertaure: -40°F - 120° F
  • Weight:
    • 3/8 in. hose: .19 lbs per ft.
    • 1/2 in. hose: .29 lbs per ft.
  • Minimum Bend Radius: 4 in. (102 mm)
1000 to 1125 PSI Working Pressure
3/8 in. I.D. Working Pressure 1125 PSI Part No.
Standard Packaging (feet)
1/2 in. I.D. Working Pressure 1100 PSI Part No.
Standard Packaging (feet)
3333-0015
600-699
3333-0038
50-299
3333-0017
1000 plus
3333-0035
1000 plus

Note: Cut charge will apply for custom lengths. Call for availability.

Descriptions

Gates® 33HB Diver's Breathing Hose is kink resistant and meets MIL-H-2815G Section 3.12.2 off-gassing for air breathing applications especially for commercial diving. These hoses specialize in handling mixtures or oxygen, helium, and nitrogen gases customarily used in diving applications as air breathing hoses.

The Amron International Hose Barb (AHB) is the safest fitting for the Gates® 33HB Diver's Hose.

Videos

Additional Information

Brand Gates
Video No
FAQ
 

Product FAQ's

Ask a Question

  • Which Band-it clamp do I use when installing any 3/8" Amron Hose Barb on my 3/8” 33HB Diver’s Hose or 34BA Synflex Breathing Air Hose?
    Amron recommends using six J-240 Band-it clamps per hose. On most umbilical’s you would use three clamps on each side.
    How helpful was this information?

  • Can I use a permanent swage on hose fitting on my Gates 33HB Diver's Hose?
    No, the Gates 33HB Diver's Hose was not designed to be used with permanent swage on hose fittings. Gates only recommends using hose barb style fittings with Band-it clamps or their 33HB Brass Diver's Air Hose Couplings.
    How helpful was this information?