Request a Quote

Please fill out the following form below.

Amron International 300 ft. Military 4 Part Taped Umbilical with Oxygen Fittings and 4-Pin Female Waterproof Connector

SKU: 33HB1-MK21-M2-0-300 Rate this product

$2,976.78

Availability: Contact us for availability

Click to Enlarge Image

Overview

Includes:

  • 3 part umbilical includes: 3/8 in. 33HB Divers Hose, 1/4 in. Pneumo Hose, CC1 Communications Cable, and 1/2 in. Nylon Lifeline
  • Oxygen fitting on both ends of the divers hose and on the surface end of the pneumo hose
  • 4 pin waterproof connector installed on the diver’s side of the communications cable
  • Banana plugs on the surface end of the communications cable
  • D-ring with shackle installed on the diver’s end and one D-ring installed on the surface end
  • Brass Tag
  • Tested with certification provided

Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

Amron sells many different diving umbilical configurations. If you don’t see the configuration you need, please call our award winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!

Description

The Amron International Commercial Diving Taped Umbilical is a 4 part umbilical that includes 3/8 in. 33HB Divers Hose, 1/4 in. Pneumo Hose, CC1 Communications Cable, and 1/2 in. Nylon Lifeline.

Oxygen fitting on both ends of the divers hose and on the surface end of the pneumo hose. 4 pin waterproof connector installed on the diver’s side of the communicators cable and Banana plugs on the surface end.

D-ring with shackle installed on the diver’s end and one D-ring installed on the surface end.

Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.

Amron sells many different diving umbilical configurations. If you don’t see the configuration you need, please call our award winning sales staff at (760) 208-6500 or email us at sales@amronintl.com to help build your diving umbilical, get a quote, and place your order today!

Attachments
Videos

Additional Information

Brand Amron International
Video No
FAQ
 

Product FAQ's

Ask a Question

  • How often should I pressure test my umbilical?

    According to ADCI and IMCA you should pressure test your umbilical annually. Along with your annual pressure test, you should also consider preforming a pull-test on the fittings, thoroughly visually inspect each umbilical member, and clean the inside of the diver’s gas hose.   

    How helpful was this information?

  • Does Amron’s taped and spiral umbilical come with a 90 day warranty?

    No, umbilical’s and hoses are considered custom made equipment and are non-cancelable and non-returnable.  However, all umbilical’s are pressure and continuity tested before they leave Amron meaning there are no manufacturer defects in the hose or the fittings/connectors that were put on.

    How helpful was this information?

  • Which side of the diver’s umbilical should I install the umbilical sheath on?

    Diver’s side. 

    How helpful was this information?